Sunday, May 31, 2009

My First Fixie: Red Lugs, black accents

So I painted the red on this weekend and it turned out alright.









You can kinda tell that the paint lines aren't too clean, so I decided to do some outlining in black. This was not the greatest idea, but whatevs, it's my first. So I tried doing a little design like so:





But it didn't turn out that well...





So I decided to go a bit more, and I think it turned out ok. Not fantastic, but ok.



I'll probably go buy a fine tip Sharpie to clean up the red/grey lines, as the black is a little too much. But it'll make for some fun designs. Lesson learned: tape well the first time to avoid runs!

Wednesday, May 27, 2009

My First Fixie: paint is on - Arctic Grey FTW

The main color, Arctic Grey, has been applied.







Now I wait a few days, tape off the parts to remain grey, the apply the red. This has been a fun and enjoyable process for sure.

Thursday, May 21, 2009

Btw, I'm on Twitter

You can follow me here: @jc00ke. Yes, those are zeros.

My First Fixie

I'm in the process of building my first fixed gear bicycle. Something about the minimalist in me craves a fixie. And while I'm not into Portland's bike scene, I think the people that ride here have a good style. So, after reading many articles and following several very good fixie blogs, I decided to give it a whirl.

I bought an old Bianchi from Nathan who had purchased it from a friend. It was pretty beat up:




With some reading online of how to repaint a bike, and some very good advice from Joe Neff, I got to work stripping the paint off.



After 2 rounds of spray paint remover, this is what it looked like:


So then I used some gel paint remover and a pack of steel wool, which after 2 more coats and an hour of polishing, I was finally done.









This last weekend I bought a set of wheels, which after looking around I got a pretty good deal on. Surly hubs with Mavic CXP 33 rims.





For shits and giggles I put it all together just to get a feel for it.


I'm going to need to get a new stem, something with a rise of like 15 deg, and some bars that don't sweep back so much. I'll have to get new cranks and a different chainring, because the back is a 15 tooth and the front is 52, which is too much for me. Still trying to figure that out though.

More pics to follow as I prime, paint, etc.